Home WTI User's Guides
cover
Warnings and Cautions
1. Introduction
2. Unit Description
2.2. Back Panel
3. Getting Started
3.1. Communication Parameters
3.2. Apply Power to the APS-16
3.3. Connecting your PC to the APS-16
3.4. Communicating with the APS-16 Unit
4. Hardware Installation
4.1. Configure Setup Switches
4.1.1. Default Baud Rate
4.2. Initialize Unit to Default Settings
4.3. Connecting Devices to the APS-16
5. Configuration
5.1. Access to the APS-16 Command Mode
5.2. Defining and Reading the Site I.D.
5.3. Port Configuration
5.3.1. Configuration Conventions
5.3.2. Port Modes
5.3.3. Command Availability
5.3.4. Port Configuration Menu
6. Operation
6.1. Any-to-Any Mode
6.1.1. Port Connection and Disconnection
6.1.1.1. Using ASCII Commands to Connect Ports
6.1.1.2. Disconnecting Ports
6.1.2. Defining Hunt Groups
6.2. Passive Mode
6.3. Buffer Mode
6.3.1. Reading Data from Buffer Mode Ports
6.3.2. Port Buffers
6.4. Modem Mode
7. Saving Configuration Parameters
7.1. Sending Parameters to a File
7.2. Restoring Saved Parameters
8. Command Reference Guide
8.1. Command Conventions
8.2. Command Response
8.3. Command Summary
8.4. Command Set
A. RS-232 Port Interface
B. Specifications
C. Customer Service
Index
APS-16

B. Specifications

 

Interface: 16 RS232 serial inputs use DB9 connectors configured as DTE ports. Coding: Asynchronous, 7/8 bits ASCII. Parity: Even, Odd, None Stop Bits: 1or2. Data Rate: 300 to 115.2K bps (all standard rates). Flow Control: XON/XOFF, RTS/CTS, Both, or None. Timeout: No activity timeout disconnects port. 1, 5, 10, 15, 30 seconds, 1, 5, 15, 30, 90 minutes. Memory: Non-volatile 512K SRAM buffer memory. Statically allocated. Setup Switch: 8 position, sets default parameters for baud rate, flow control and port mode. LEDs: Power On, Ready, Data Activity for Ports 1-16. Temperature: 0�Cto50�C (operating) Power: Internal: 115 VAC, 0.05A 60 Hz, 6 watts 230 VAC, 0.03A 50 Hz, 6 watts Size: 1.75" x 17.0" x 6.5" (HxWxD) Weight: 6 lbs. shipping weight