Home WTI User's Guides
cover
Warnings and Cautions
1. Introduction
2. Unit Description
2.1. Front Panel
2.2. Back Panel
3. Getting Started
4. Hardware Installation
4.1. Connecting Power to the APS Unit
4.1.1. AC Powered Units
4.1.2. DC Powered Units
4.2. Configure SetUp Switches
4.2.1. Default Baud Rate
4.2.2. Default Handshake
4.2.3. Default Response Message Format
4.2.4. Default Command Echo
4.3. Initialize Unit to Default Settings
4.4. Connecting Devices to the APS
5. Configuration
5.1. Access to the APS Command Mode
5.2. System SetUp Ports
5.3. Password Functions
5.4. The System Parameters Menu
5.4.1. The Password Directory
5.4.2. The Dial Back Function
5.5. Port Configuration
5.5.1. Configuration Conventions
5.5.2. Port Modes
5.5.3. RS232 Port Configuration Menus
5.5.4. The Invalid Access Lockout Feature
5.6. Copying Parameters to All Ports
5.7. Save User Selected Parameters
6. The Internal Modem
6.1. Communicating with the Internal Modem
6.2. Common AT Commands
7. The Status Screens
7.1. The Port Status Screen
7.2. The Port Diagnostics Screen
7.3. The Port Parameters Screens
7.4. The Password Directory Screen
8. Operation
8.1. Any-to-Any Mode
8.1.1. Port Connection and Disconnection
8.1.1.1. Connecting Ports
8.1.1.2. Disconnecting Ports
8.1.2. Defining Hunt Groups
8.2. Passive Mode
8.3. Buffer Mode
8.3.1. Reading Data from Buffer Mode Ports
8.3.2. Port Buffers
8.4. Modem Mode
9. Saving and Restoring Configuration Parameters
9.1. Sending Parameters to a File
9.2. Restoring Saved Parameters
10. Upgrading APS-8M Firmware
11. Command Reference Guide
11.1. Command Conventions
11.2. Command Response
11.3. Command Summary
11.4. Command Set
A. RS232 Port Interface
B. Specifications
C. Customer Service
Index