Home WTI User's Guides
cover
Warnings and Cautions
1. Introduction
2. Unit Description
2.2. Back Panel
3. Getting Started
4. Hardware Installation
4.1. Connecting Power to the CMS-32
4.1.1. AC Powered Units
4.1.2. DC Powered Units
4.2. Configure Option Switches
4.2.1. Default Baud Rate
4.2.2. Default Handshake
4.2.3. Default Response Message Format
4.2.4. Default Command Echo
4.3. Initialize Unit to Default Settings
4.4. Connecting the Network Cable
4.5. Connecting Devices to the CMS-32
4.6. Application Example
5. Configuration
5.1. Command Mode Access
5.2. System SetUp Ports
5.3. Password Functions
5.3.1. The Supervisor Password
5.3.2. The Port Passwords
5.4. Defining System Parameters
5.5. Port Configuration
5.5.1. Configuration Conventions
5.5.2. Port Modes
5.5.3. RS232 Port Configuration Menus
5.5.4. Network Port Configuration Menu
5.5.5. Implementing IP Security
5.6. Copying Parameters to Several RS-232 Ports
6. The Status Screens
6.1. The Port Status Screen
6.2. The Port Diagnostics Screen
6.3. The Network Status Screen
6.4. The Port Parameters Screens
7. Operation
7.1. Any-to-Any Mode
7.1.1. Port Connection and Disconnection
7.1.1.1. Connecting Ports
7.1.1.2. Disconnecting Ports
7.1.2. Defining Hunt Groups
7.2. Passive Mode
7.3. Buffer Mode
7.3.1. Reading Data from Buffer Mode Ports
7.3.2. Port Buffers
7.4. Modem Mode
8. Telnet Functions
8.1. Network Port Numbers
8.2. The Direct Connect Feature
8.2.1. Standard Telnet Protocol and Raw Socket Mode
8.2.2. Configuration
8.2.3. Connecting to an RS232 Port using Direct Connect
8.2.4. Terminating a Direct Connect Session
8.3. Inbound Telnet Connections
8.4. Outbound Telnet Connections
8.4.1. Password Protection
8.4.2. Command Syntax
9. The Syslog Feature
9.1. Configuration
9.2. The Syslog Message
9.3. Criteria for Generating a Syslog Message
9.4. Testing Syslog Configuration
10. SNMP Traps
10.1. Configuration
10.2. SNMP Trap Message
10.3. How and When SNMP Traps are Sent
10.4. Testing the SNMP Trap Function
11. Saving and Restoring Configuration Parameters
11.1. Sending Parameters to a File
11.2. Restoring Saved Parameters
12. Upgrading CMS-32 Firmware
13. Command Reference Guide
13.1. Command Conventions
13.2. Command Response
13.3. Command Summary
13.4. Command Set
A. RS232 Port Interface
B. Specifications
C. Customer Service
Index