Home WTI User's Guides
cover
Warnings and Cautions
1. Introduction
2. Unit Description
2.1. Front Panel
2.2 Front Panel Button Functions
2.3 Back Panel
2.4 Front Panel
2.5 Front Panel Button Functions
3. Getting Started
3.1 Quick Hardware Installation
3.2 Communicating with the RSM
4. Hardware Installation
4.1. Connecting Power to the RSM Unit
4.2. Connecting the Network Cable
4.3. Connecting Devices to the RSM
5. Basic Confiuration
5.1. Communication with the RSM Unit
5.1.1. The Text Interface
5.1.2. The Web Browser Interface
5.1.3. Access Via PDA
5.2. Configuration Menus
5.3 Defining System Parameters
5.4. User accounts
5.4.1. Command Access Levels
5.5. Managing User acconts
5.5.1. Viewing User Accounts
5.5.2. Adding User Accounts
5.5.3. Modifying User Accounts
5.5.4. Deleting User Accounts
5.6. Serial Port Configuration
5.6.1. Serial Port Modes
5.6.2. The Serial Port Configuration Menu
5.6.3. Copying Parameters to Several Serial Ports
5.7. Network Configuration
5.7.1. Network Port Parameters
5.7.2. Network Parameters
5.7.2.1. Modem Pooling
5.7.3. IP Security
5.7.3.1. Adding IP Addresses to the Allow and Deny Lists
5.7.3.2. Linux Operators and Wild Cards
5.7.3.3. IP Security Examples
5.7.4. Static Route
5.7.6. SNMP Access Parameters
5.7.7. SNMP Trap Parameters
5.7.8. LDAP Parameters
5.7.8.1. Adding LDAP Groups
5.7.8.2 Viewing LDAP Groups
5.7.8.4. Deleting LDAP Groups
5.7.9. TACACS Parameters
5.7.10. RADIUS Parameters
5.7.10.1. Dictionary Support for RADIUS
5.7.11. Email Parameters
5.8. Save User Selected Parameters
5.8.1. Restore Configuration
6. Alarm Configuration
6.1. The over Temperature Alarms
6.2. The Lost Communication Alarm
6.3. The Ping no Answer Alarm
6.3.1. Defining Ping No Answer IP Addresses
6.3.2. Configuring the Ping No Answer Alarm
6.4. The Invalid Access Lockout Alarm
6.5. The Power Cycle Alarm
6.6. Buffer Threshold Alarm
6.7. The Voltage Lost Alarm
7. The Status Screens
7.1. Product Status
7.2. The Port Status Screen
7.3. The Port Diagnostics Screen
7.4. The Network Status Screen
7.5. The Port Parameters Screen
7.6. The Event Logs
7.6.1. The Audit Log
7.6.2. The Alarm Log
7.6.3. The Temperature Log
8. Operation
8.1. Any-to-Any Mode
8.1.1. Port Connection and Disconnection
8.1.1.1. Connecting Ports
8.1.1.2. Disconnecting Ports
8.1.2. Defining Hunt Groups
8.2. Passive Mode
8.3. Buffer Mode
8.3.2. Port Buffers
8.4. Modem Mode
8.5. Manual Operations
8.6. Logging out of Command Control
9. Telnet and SSH Functions
9.1. Network Port Numbers
9.2. SSH Encryption
9.3. The Direct Connection Feature
9.3.1. Standard Telnet Protocol SSH and Raw Socket
9.3.2. Configuration
9.3.3. Connecting to an RS232 Port using Direct Connect
9.3.4. Terminating a Direct Connect Session
9.4. Creating an Outbound Telnet Connection
9.5. Creating an Outbound SSH Connection
10. Syslog Messages
10.1. Configuration
11. SNMP Traps
11.1. Configuration
12. Operation via SNMP
12.1 RSM SNMP Agent
12.2 SNMPv3 Authentication and Encryption
12.3 Configuration via SNMP
12.3.1. Viewing Users
12.3.2. Adding Users
12.3.3. Modifying Users
12.3.4. Deleting Users
12.4. Configuring Serial Ports
12.5 Viewing Unit Status vis SNMP
12.6. Sending Traps vis SNMP
13. Setting up an SSL Encryption
13.1 Creating a Self Signed Certificate
13.2. creating a Signed Certificate
13.3. Downloading the Server Private Key
14. Saving and Restoring Configuration Parameters
14.1. Sending Parameters to a File
14.2. Restoring saved Parameters
14.3. Restoring Previously Saved Parameters
15. Upgrading TSM Firmware
15.1. Firmware Upgrade Utility
15.2. The Upgrade Firmware Function
16. Command Reference Guide
16.1. Command Conventions
16.2. Command Summary
16.3. Command Set
16.3.1. Display Commands
16.3.2. Control Commands
16.3.3. Configuration Commands
Appendix A.
Appendix B. Specification
Appendix C Connecting Devices to TSM
C.1 Straight RJ-45
C.2. Connecting DB-9M
C.3. Connecting 9B-25F
C.4. Connecting DB-9F
C.5. Connecting RJ-45
C.6. DX9F-NULL-Rj Snap Adapter
Appendix D. Customer Service
Index