Home WTI User's Guides
Warnings and Cautions
1. Introduction
2. Unit Description
2.1. Front Panel Components
2.2. Back Panel Components
3. Quick Start
3.1. Hardware Installation
3.1.1. Apply Power to the RPC-4850-8N
3.1.2. Connect your PC to the RPC-4850-8N
3.2. Communicating with the RPC-4850-8N
4. Installation
4.1. Power Supply Connection
4.2 Connecting Switched Devices to the RPC-4859-8N
4.3. Serial Console - RS232 Port Connection
4.3.1. Connecting a Local PC
4.3.2. Connecting an External Modem
4.4. Connecting the Network Cable
5. Configuration
5.1. System Mode and User Mode
5.2. Communicating with the RPC-4850-8N
5.2.1. Accessing the Web Browser Interface
5.3. Configuration Menus
5.3.1. The General Parameters Menus
5.3.2. The Serial Parameters Menu
5.3.3. Circuit Parameters Menus Circuit Passwords and Co-Location Features The Boot - Sequence Delay Period.
5.3.4. Network Parameters Menus IP Security Feature
5.3.5. The Telnet Parameters Menus
5.3.6. Web Server Parameters Menus
5.4. Save Configuration Parameters
6. Operation
6.1. Operation via the Web Browser Interface
6.1.1. The Circuit Status Screen - Web Browser Interface
6.2. Operation via the Text Interface
6.2.1. The Circuit Status Screen - Text Interface
6.2.2. Switching and Reboot Commands - Text Interface
6.2.3. Applying Commands to Several Circuits -Text Interface
6.3. Logging Out of Command Mode
6.4. The Automated Mode
6.5. Manual Operation
7. Saving and Restoring Configuration Parameters
7.1. Sending Parameters to a File
8. Upgrading the RPC Firmware
A. Interface Description
A.1. Serial Console RS232 Port Interface
B. Specifications
C. Customer Service