Home WTI User's Guides
Warnings and Cautions
1. Introduction
2. Unit Description
3. Quick Start
3.1. Hardware Installation
3.1.1. Apply Power to the NBB
3.1.2. Connect your PC to the NBB
3.2. Communicating with the NBB
4. Installation
4.1. Power Supply Connection
4.2. Connection to Switched Outlets
4.3. Console Port Connection
4.3.1. Connecting a Local PC
4.3.2. Connecting an External Modem
4.4. Connecting the Network Cable
5. Configuration
5.1. System Mode and User Mode
5.2. Communicating with the NBB
5.2.1. Accessing the Web Browser Interface
5.2.2. Accessing the Text Interface
5.3. Configuration Menus
5.3.1. The General Parameters Menus
5.3.2. The Serial Parameters Menu
5.3.3. The Plug Parameters Menus Plug Passwords and Co-Location Features The Boot - Sequence Delay Period
5.3.4. Network Parameters Menus IP Security Feature
5.3.5. The Telnet Parameters Menus
5.3.6. Web Server Parameters Menus
5.4. Save Configuration Parameters
6. Operation
6.1. Operation via the Web Browser Interface
6.1.1. The Plug Status Screen - Web Browser Interface
6.2. Operation via the Text Interface
6.2.1. The Plug Status Screen - Text Interface
6.2.2. Switching and Reboot Commands - Text Interface
6.2.3. Applying Commands to Several Plugs - Text Interface
6.3. Logging Out of Command Mode
6.4. The Automated Mode
6.5. Manual Operation
7. Saving and Restoring Configuration Parameters
7.1. Sending Parameters to a File
7.2. Restoring Saved Parameters
8. Upgrading the NBB Firmware
A. Interface Descriptions
A.1. Console Port Interface
B. Specifications
C. Customer Service