Home WTI User's Guides
cover
1. Introduction
2. Unit Description
2.2. Back Panel
3. Installation
3.1. PBX Port Connection
3.2. Computer Port Connection
3.3. Speed Select Switches
3.3.1. Computer Port Baud Rate
3.3.2. PBX Port Baud Rate
3.3.3. Output Parity
3.3.4. Single Line Release Function
3.3.5. Modem Mode
4. Operation
4.1. Clear Memory
4.2. Test Memory
4.3. Command Set
4.4. Data Release
4.4.1. XON-XOFF Flow Control
4.4.2. CTS-RTS Flow Control
4.4.3. DTR Flow Control
4.5. Auto-Erase Function
4.6. Output Test Function
4.7. The Modem Mode
5. Interface Descriptions
5.1. Computer Port
5.1.1. Connecting a Modem
5.2. PBX Port
6. Specifications
7. Customer Service
PollCat-ILB

3.2. Computer Port Connection

The Computer Port uses a DCE configuration, which can be directly connected to your PC or polling device using a standard serial cable. For 25 pin PC COM Ports, use straight wired, pin to pin cable. For 9 pin PC COM ports, use a 9 pin to 25 pin adapter, or a 9 pin to 25 pin modem cable.