Home WTI User's Guides
1. Introduction
2. Unit Description
2.2. Back Panel
3. Installation
3.1. PBX Port Connection
3.2. Computer Port Connection
3.3. Speed Select Switches
3.3.1. Computer Port Baud Rate
3.3.2. PBX Port Baud Rate
3.3.3. Output Parity
3.3.4. Single Line Release Function
3.3.5. Modem Mode
4. Operation
4.1. Clear Memory
4.2. Test Memory
4.3. Command Set
4.4. Data Release
4.4.1. XON-XOFF Flow Control
4.4.2. CTS-RTS Flow Control
4.4.3. DTR Flow Control
4.5. Auto-Erase Function
4.6. Output Test Function
4.7. The Modem Mode
5. Interface Descriptions
5.1. Computer Port
5.1.1. Connecting a Modem
5.2. PBX Port
6. Specifications
7. Customer Service

4.1. Clear Memory


To clear all data from memory, proceed as follows. 
  Cleared data cannot be recovered. 
  Data can also be cleared by invoking the ^C Command as described in Section 4.3. 
1 Turn off AC power to the PollCat ILB. 
2 Press and hold the Default Button, turn on power to the unit and then quickly release the Default Button. When the button is released, the "80% Full" and "Full" LEDs will blink twice, indicating that memory has been cleared.