Home WTI User's Guides
cover
1. Introduction
2. Unit Description
2.1. Front Panel Indicators
2.2. Back Panel
3. Hardware Installation
3.1. Set-Up Switches
3.1.1. Default Baud Rate for Computer
3.1.2. Default Baud Rate for PBX Input Ports A and B
3.1.3. Direct Connect Mode
3.1.4. Computer Port Password
3.1.5. Power Up Default
3.2. Connecting the Data Cables and Telephone Line
3.2.1. PBX Inputs A and B
3.2.2. Modem Port
3.2.3. Computer Port
3.3. Connect the AC Power Cable
4. Program Set-Up
4.1.1. Reset Default Parameters - Clear Memory
4.1.2. Set General Parameters
4.1.2.1. Select Duplex Mode
4.1.2.2. Set Clock and Calendar
4.1.2.3. Set Communication Parameters
4.2. Define PBX Data Input Format
4.2.1. Define End-of-Record Character
4.2.2. Strip Non-Printable Codes Function
4.2.3. Time-Date Stamp Function
4.2.4. Enable-Disable Wrap Around Mode
4.3. Define Data Output Format
4.3.1. Select-Configure Data Output Mode
4.3.1.1. ASCII Record Mode
4.3.1.2. ASCII Block Mode
4.3.1.3. Binary Block Mode
4.3.1.4. XMODEM Mode
4.3.2. The CRC Function
4.3.3. The Line I.D. Function
4.3.4. Select Compression Mode
4.3.1.2. ASCII Block Mode
4.3.1.4. XMODEM Mode
4.3.2. The CRC Function
4.3.3. The Line I.D. Function
4.3.1.1. ASCII Record Mode
4.3.1.2. ASCII Block Mode
4.3.1.3. Binary Block Mode
4.3.1.4. XMODEM Mode
4.3.2. The CRC Function
4.3.3. The Line I.D. Function
4.3.4. Select Compression Mode
4.3.5. Release Data with Command B02
4.3.6. Hold END DATA Message
4.4. Callback Features
4.4.1. Define Callback Parameters
4.4.2. Scheduled Callback
4.4.3. 80 Full Callback
4.4.4. Immediate Callback
4.4.5. No-Data Alarm
4.4.6. Toll Fraud Alarm
4.5. Define Header Message-Auto Execute Command-Report Mode Command String
4.5.1. Header Message
4.5.2. The Auto Execute Command
4.5.3. The Report Mode Command String
4.6. The Data Filter
4.7. The Alarm Filter
5. The No-Data Alarm
5.1. Timer Schedules
5.2. Enabling the No-Data Alarm
6. The Data Filter
6.1. Defining the Data Filter Format
6.2. Defining Data Filter Parameters
6.3. Enabling the Data Filter
6.4. Logical and Relational Operators
6.4.1. Equal To Conditions
6.5. Logical AND OR Conditions
6.5.1. AND Conditions
6.5.2. OR Conditions
6.6. Data Filter Parameter Definition Examples
7. The Alarm Filter
7.1. The Alarm Filter Format
7.1.1. Common Types of Suspect Phone Activity
7.1.2. Defining the Alarm Filter Format
7.2. Alarm Clues
7.2.1. Alarm Clue Definition
7.2.2. Enabling the Alarm Filter
7.2.3. Logical and Relational Operators
7.2.3.1. Logical AND-OR Conditions
7.2.4. Real-Time Variables
7.2.5. Testing Alarm Clues
7.3. Selecting an Alarm Notification Method
7.3.1. Alarm Off
7.3.2. Local Alarm
7.3.3. Remote Alarm
7.3.4. Pager
7.3.5. Report
7.3.6. Pager
7.3.7. Switching Alarm Methods
7.3.8. The Alarm Message
7.4. Responding to a Toll Fraud Alarm
7.4.3. Reset ALM LED and Alarm Port
7.4.4. Displaying Alarm Data
7.4.5. Clear Alarm Condition
7.4.6. Resetting Alarm Clue Counters
7.4.7. The Pass-Through Mode and the Monitor Mode
8. Saving PollCat III Parameters
8.1. B99 Command Options
8.2. Saving Parameters to an ASCII File
8.3. Configuring PollCat III with Saved Parameters
9. Polling Accumulated Data
9.1. The Data Release Mode
9.1.1. Data Release Command Options
9.2. Polling
9.2.1. Example 1 Polling Device Calls PollCat III Via Modem
9.2.4. Example 4 XMODEM Polling
10. Command Reference Guide
10.1. Access to Command Mode
10.2. Command Syntax
10.3. Command Summary
A. Advanced Format and Clue Definition
A.1. Alarm Filter Format Definition
A.2. Alarm Clue Definition
A.2.1. Alarm Clue Examples
A.2.1.1. Repeated Attempts to Access Voice Mail
A.2.1.4. Unusual International Calls
A.2.1.5. Calls to Your Competitors
A.2.1.6. Calls to 900 Numbers
A.2.1.7. Calls From a Particular Extension
A.2.1.8. The Contains String Operator
A.3. Clue Definition Logic
A.3.1. Headers Banners and Other Non-Data
A.3.2. The Comparative Operators
A.3.2.1. Limit the Scope of Comparisons
A.3.2.2. Exclude Non-Data Characteristics
A.3.3. Exact Match with PBX Call Record Format
A.4. Programming Support
B. Cable Installation
C.3. Alarm Port
D. PollCat II Compatibility
D.1. Alarm Filter
D.2. Port Modifications
D.3. Status Screens
D.4. Connection
D.5. Other Modified or Eliminated Commands
E. LED Indicators
F. Specifications
G. Customer Service
H. FCC Statement
I.1. Response Message Summary
Index
4.4.3. Console Port
8.6. Assigning the Data Filter to a Port
14. Scheduled Actions
PollCat III B

8.1. B99 Command Options

 

Command ^B99 can be invoked with a variety of different options. These options are designed to streamline the upload/download process by sending only specific parameters, and/or arranging data in a manner where several parameters are combined in a single, continuous line.

Note:

•                      When parameters are saved to an ASCII file, the "^A" character is substituted for the "^B" character. If the ASCII file is uploaded to the PollCat III, the ^A character allows commands to be executed without echoing back to the polling device.

•                      With the exception of options ^B99,* and ^B99 (plain), each set of parameters will be listed in a single, continuous line, terminated by <CR><LF>.

•                      Alarm Filter Parameters (defined using Command ^B81) will only be saved when options ^B99,* and ^B99 (plain) are invoked. Options ^B99,1 through ^B99,9 will not include Alarm Filter Parameters.

 

Command ^B99 offers the following options:

^B99 All Parameters, Line by Line: Downloads all parameters specified in Table 8.1. Each parameter is listed on a separate line, terminated by <CR><LF>.

^B99,* All Parameters, Condensed: Downloads all parameters specified in Table 8.1. In order to stream­line the upload/download process, several parameters are included on each line. Each line is terminated by <CR><LF>.

^B99,0 "00" Series Parameters: Downloads parameters for Commands ^B04 (Banner Message / Auto Execute / Report Command) and ^B05 (EOR Character).

^B99,1 ^B12 Callback Schedule Parameters: Downloads parameters for Command ^B12 (Callback Schedule). ^B99,2 ^B14 Callback Parameters: Downloads parameters defined under Command ^B14 (Callback Parameters).

^B99,3 ^B15 No-Data Alarm Parameters: Downloads parameters for the No-Data Alarm, defined under Command ^B15.

^B99,4 "40" Series Command Parameters: Downloads parameters for Commands ^B40 (Data Filter Format), ^B42 (Data Filter Parameters), and ^B44 (Alarm Filter Format).

^B99,5 "50" Series Command Parameters: Downloads parameters for Commands ^B52 (Hold "End Data"), ^B53 (Compression), ^B54 (Release Data with ^B02), ^B55 (Non-Printable Codes), ^B56 (Enable Data Filter), ^B57 (XON/XOFF), ^B58 (Response Message Type), and ^B59 (Line I.D.).

^B99,6 "60" Series Command Parameters: Downloads parameters for Commands ^B62 (Output Format), ^B63 (CRC Option), ^B64 (Wrap Around Mode), ^B65 (Enable Alarm Filter), ^B66 (Time/Date Stamp), ^B67 (Auto Delete Option), ^B68 (Duplex Mode), and ^B69 (Enable Auto Execute Option).

^B99,7 "70" Series Command Parameters: Downloads parameters for Commands ^B70 (Callback Options), ^B71 (DLE Stuffing), ^B75 (SURE? Prompt), ^B77 (Modem Reset Message), and ^B79 (Define Password).

^B99,8 "80" Series Command Parameters: Downloads parameters for Commands ^B80 (Block Size), ^B85 (Counter Reset Schedule), and ^B87 (Alarm Notification).

^B99,9 "90" Series Command Parameters: Downloads parameters for Commands ^B90 (Modem Port), ^B91 (Computer Port), ^B92 (PBX Port A), and ^B93 (PBX Port B).