Home WTI User's Guides
cover
1. Introduction
2. Unit Description
2.1. Front Panel Indicators
2.2. Back Panel
3. Hardware Installation
3.1.1. AC Powered Units
3.1.2. DC Powered Units
3.2. Set-Up Switches
3.2.1. Default Baud Rate for Console Port
3.2.2. Default Baud Rate for PBX Port A PBX Port B and AUX Port
3.2.3. Dialback Security Mode
3.2.4. Console Port Password
3.2.5. Power Up Default
3.3. Reset to Defaults
3.4.1. PBX Inputs A and B and AUX Port
3.4.2. Modem Port
3.4.3. Console Port
3.4.4. Network Port
4. Configuration
4.1. Access to the Command Mode
4.2. Menu System Conventions
4.2.1. Script Access to Menu Functions
4.3. Set System Parameters
4.4. Port Configuration
4.4.1. PBX Port A and PBX Port B
4.4.2. Auxiliary Port Configuration
4.4.3. Console Port Configuration
4.4.4. Modem Port Configuration
4.4.4.1. Dialback Security
4.4.5. Network Port Configuration
5. Menu System Description
5.1. Software Tree
6. Status Screens
6.1. Buffer Status Screen
6.2. File List Screen
6.3. System Status Screen
6.4. Scheduled Action Status Screens
6.5. Dialback Security Status Screen
6.6. Data Filters Alarms Status Screen
6.7. Alarm Condition Status Screen
6.8. Alarm Filter Clue Status Screens
6.10. 80 Full Alarm Status Screen
6.11. Input Contact Alarm Status Screen
6.12. Reason for Action Screen
6.13. PBX Port Status Screens
6.14. Auxiliary Port Status Screen
6.15. Console Port Status Screen
6.16. Modem Port Status Screen
6.17. Network Port Status Screen
6.18. Network Status Screen
7. The Data Filters
7.1. The Data Filter Configuration Menus
7.2. Defining the Data Filter Format
7.3. Defining Data Filter Clues
7.4. Logical and Relational Operators
7.4.1. Logical AND-OR Conditions
7.4.1.1. Logical AND Conditions
7.4.1.2. Logical OR Conditions
7.4.2. The Contains String Operator
7.5. Real Time Variables
7.6. Assigning the Data Filter to a Port
7.6. Assigning the Data Filter to a Port
8. The Alarm Filters
8.1. Common Types of Suspect Phone Activity
8.2. The Alarm Configuration Menu
8.2.1. Default Alarm Filter Actions
8.3. The Alarm Filter Configuration Menus
8.4. Defining the Alarm Filter Format
8.5. Defining the Alarm Filter Clues
8.5.1. Alarm Clue Definition
8.5.2. Editing and Deleting Clues
8.6. Logical and Relational Operators
8.6.1. Logical AND-OR Conditions
8.6.1.1. Logical AND Conditions
8.6.1.2. Logical OR Conditions
8.6.2. The Contains String Operator
8.7. Real Time Variables
8.8. Assigning the Alarm Filter to a Port
8.9. Match Parameter Definition Examples
9. PBX Inactivity Alarms
9.1. Schedules and Timers
9.2. Enabling the PBX Inactivity Alarm
10. The 80 Full Alarm
11. The Input Contact Alarms
11.1. The Optional IO Monitor
11.2. Configuring the Input Contact Alarm
12. Alarm Actions
12.1. Alarm Actions for Alarm Filter Clues
12.2. Alarm Action Summary
12.2.1. None
12.2.2. Callout
12.2.3. Alphanumeric Page
12.2.4. Numeric Page
12.2.5. SNMP Trap
12.2.6. Output Contact
12.2.7. Console
12.3. The Auto Execute Function
13. Scheduled Actions
14. Saving NetLink Parameters
14.1. Saving Parameters to Flash Memory
14.2. Saving and Restoring Parameters from an ASCII File
14.2.1. Saving Parameters to an ASCII File
14.2.2. Saving Parameters to an ASCII File
14.3. Configuring NetLink with Saved Parameters
15. Buffer Functions
15.1. Memory Partitions and Shared Data
15.1.1. Partitions and Files
15.1.2. Setting the Partition
15.1.3. Releasing the Partition
15.2. Menu Driven Data Release
15.2.1. The Buffer Functions Menu
15.2.2. Read Session Parameters
15.3. Command Driven Data Release
15.3.1. Command B00
15.3.2. The B01 Command Line
15.3.3. Command B01 Examples
15.3.4. Other Commands Used During Data Release
15.4. Retrieving Data Using FTP Push
15.4.2. FTP Push Start Time
15.5. The FTP Server Feature
15.5.1. Configuring the FTP Server Feature
15.5.2. Retrieving Data Using FTP Server
15.5.3. File Names for the FTP Server Function
15.5.5. Response Messages Generated by the FTP Server Function
15.6. The Auto Delete Function
15.7. Zmodem Data Release Mode
16. Other Menu Functions
16.1. System Functions
16.1.1. Security Level
16.1.2. Pass-Through Mode
16.1.3. Monitor Mode
16.1.4. Clear Alarm Condition
16.1.5. Clear Alarm Counters
16.1.6. Download Parameters
16.1.7. Audit Trail
16.1.8. Upload Firmware
16.2. System Diagnostics
16.2.1. Load and Test Memory
16.2.2. Send Test Message
16.2.3. Test Pager
16.2.4. Send Test SNMP Trap
16.3. Default Parameters
17.3. Real Time Mode
17.4. Selective Read
17.5. Multiple Telnet Connections
17.5.1. Conflicts with Other Command Ports
18. Command Reference Guide
18.1. Command Mode Access
18.2. Command Syntax
18.3. Command Help
18.4. Command Summary
A. Specifications
B.2. Console Port
B.2.1. NetLink Console Port
B.2.2. NetLink Console Port
C. Cable Installation
D. Supervisor Functions and User Functions
D.1. Security Mode at Start Up
D.2. Dialback Security
D.3. Supervisor Mode and User Mode Functions
E. Alarm Clue Definition Tips
E.1. Headers Banners and Other Non-Data
E.1.1. The Comparative Operators
E.1.1.1. Limit Comparisons
E.1.1.2. Exclude Non-Data Characteristics
E.1.2. Exact Match with PBX Call Record Format
E.2. Programming Support
F. Customer Service
G. Bxx Command Summary
Index
2.1. Front Panel Indicators
PollCat NetLink

6.4. Scheduled Action Status Screens

 

As shown in Figure 6.5, this screen lists parameters for the Scheduled Action feature, which allows NetLink to perform an action (such as a page, or SNMP Trap) according to a user-defined schedule. There are two separate Action Schedules. Section 13 describes the procedure for defining these schedules. This screen includes the following:

•                      Schedule: The currently defined action schedule. The scheduled action time is listed next to the day. Days that are not included are listed as "OFF".

•                      Exclusions: Specific dates (such as holidays) when the schedule will be automatically disabled.

•                      • Action Parameters: Describes the action performed according to this schedule.

•          Action: The scheduled action; None, Callout, Alphanumeric Page, Numeric Page, SNMP Trap, Output Contact, or Console action.

•          Phone Number: Number dialed for a scheduled callout or page.

 

PollCat NetLink Version 3.27 10/17/2003 Fri 10:12 34% Full SCHEDULED CALLOUT/ACTION 1:

SCHEDULE ACTION PARAMETERS Scheduled Action: Off Action: None Sunday: Off Phone #: (undefined) Monday: Off (Cont.): Tuesday: Off Pager ID 1: (undefined) Wednesday: Off Pager ID 2: (undefined) Thursday: Off Pager ID 3: (undefined) Friday: Off SNMP Mgmt: Manager #1 Saturday: Off Output Contacts

1/2/3/4: -/-/-/­EXCLUSION (MM/DD) Message: (undefined) --/----/----/----/--(Cont.): --/----/----/----/--(Cont.): --/----/----/----/--Auto Execute: Off --/----/----/----/--Execute Cmds: (undefined) --/----/----/----/--(Cont.):

(Cont.): (Cont.):

Press <ENTER> to return to menu ...

Figure 6.5: Scheduled Action Status Screen (Schedule 1 Shown)

•                      Pager ID Numbers: The ID numbers that are used for a scheduled alphanumeric page.

•                      SNMP Manager: The SNMP Manager(s) that will receive SNMP Traps generated by this schedule.

•                      Output Contacts: The scheduled Output Contact action. A "C" indicates the contact will be closed, an "O" indicates the contact will be opened, and a dash (-) indicates that the status of the contact will not be changed.

•                      Message: The message sent when a scheduled callout, alphanumeric page, SNMP Trap, or console port action is performed.

•                      Auto Execute: If enabled, NetLink will execute a user-defined command string when a scheduled callout or console action is performed.

•                      Execute Commands: The command string that will be performed when the Auto Execute feature is enabled, and a scheduled callout or console action is generated.

 

PollCat NetLink Version 3.27 10/17/2003 Fri 10:30 34% Full DIALBACK SECURITY:

Dialback Security: Off Supervisor Dialback Phone #: (undefined)

User 1

Dialback Phone #: (undefined) User 2 Dialback Phone #: (undefined)

Press <ENTER> to return to menu ...

Figure 6.6: Dialback Security Status Screen