Home WTI User's Guides
cover
1. Introduction
2. Unit Description
2.1. Front Panel Indicators
2.2. Back Panel
3. Hardware Installation
3.1.1. AC Powered Units
3.1.2. DC Powered Units
3.2. Set-Up Switches
3.2.1. Default Baud Rate for Console Port
3.2.2. Default Baud Rate for PBX Port A PBX Port B and AUX Port
3.2.3. Dialback Security Mode
3.2.4. Console Port Password
3.2.5. Power Up Default
3.3. Reset to Defaults
3.4.1. PBX Inputs A and B and AUX Port
3.4.2. Modem Port
3.4.3. Console Port
3.4.4. Network Port
4. Configuration
4.1. Access to the Command Mode
4.2. Menu System Conventions
4.2.1. Script Access to Menu Functions
4.3. Set System Parameters
4.4. Port Configuration
4.4.1. PBX Port A and PBX Port B
4.4.2. Auxiliary Port Configuration
4.4.3. Console Port Configuration
4.4.4. Modem Port Configuration
4.4.4.1. Dialback Security
4.4.5. Network Port Configuration
5. Menu System Description
5.1. Software Tree
6. Status Screens
6.1. Buffer Status Screen
6.2. File List Screen
6.3. System Status Screen
6.4. Scheduled Action Status Screens
6.5. Dialback Security Status Screen
6.6. Data Filters Alarms Status Screen
6.7. Alarm Condition Status Screen
6.8. Alarm Filter Clue Status Screens
6.10. 80 Full Alarm Status Screen
6.11. Input Contact Alarm Status Screen
6.12. Reason for Action Screen
6.13. PBX Port Status Screens
6.14. Auxiliary Port Status Screen
6.15. Console Port Status Screen
6.16. Modem Port Status Screen
6.17. Network Port Status Screen
6.18. Network Status Screen
7. The Data Filters
7.1. The Data Filter Configuration Menus
7.2. Defining the Data Filter Format
7.3. Defining Data Filter Clues
7.4. Logical and Relational Operators
7.4.1. Logical AND-OR Conditions
7.4.1.1. Logical AND Conditions
7.4.1.2. Logical OR Conditions
7.4.2. The Contains String Operator
7.5. Real Time Variables
7.6. Assigning the Data Filter to a Port
7.6. Assigning the Data Filter to a Port
8. The Alarm Filters
8.1. Common Types of Suspect Phone Activity
8.2. The Alarm Configuration Menu
8.2.1. Default Alarm Filter Actions
8.3. The Alarm Filter Configuration Menus
8.4. Defining the Alarm Filter Format
8.5. Defining the Alarm Filter Clues
8.5.1. Alarm Clue Definition
8.5.2. Editing and Deleting Clues
8.6. Logical and Relational Operators
8.6.1. Logical AND-OR Conditions
8.6.1.1. Logical AND Conditions
8.6.1.2. Logical OR Conditions
8.6.2. The Contains String Operator
8.7. Real Time Variables
8.8. Assigning the Alarm Filter to a Port
8.9. Match Parameter Definition Examples
9. PBX Inactivity Alarms
9.1. Schedules and Timers
9.2. Enabling the PBX Inactivity Alarm
10. The 80 Full Alarm
11. The Input Contact Alarms
11.1. The Optional IO Monitor
11.2. Configuring the Input Contact Alarm
12. Alarm Actions
12.1. Alarm Actions for Alarm Filter Clues
12.2. Alarm Action Summary
12.2.1. None
12.2.2. Callout
12.2.3. Alphanumeric Page
12.2.4. Numeric Page
12.2.5. SNMP Trap
12.2.6. Output Contact
12.2.7. Console
12.3. The Auto Execute Function
13. Scheduled Actions
14. Saving NetLink Parameters
14.1. Saving Parameters to Flash Memory
14.2. Saving and Restoring Parameters from an ASCII File
14.2.1. Saving Parameters to an ASCII File
14.2.2. Saving Parameters to an ASCII File
14.3. Configuring NetLink with Saved Parameters
15. Buffer Functions
15.1. Memory Partitions and Shared Data
15.1.1. Partitions and Files
15.1.2. Setting the Partition
15.1.3. Releasing the Partition
15.2. Menu Driven Data Release
15.2.1. The Buffer Functions Menu
15.2.2. Read Session Parameters
15.3. Command Driven Data Release
15.3.1. Command B00
15.3.2. The B01 Command Line
15.3.3. Command B01 Examples
15.3.4. Other Commands Used During Data Release
15.4. Retrieving Data Using FTP Push
15.4.2. FTP Push Start Time
15.5. The FTP Server Feature
15.5.1. Configuring the FTP Server Feature
15.5.2. Retrieving Data Using FTP Server
15.5.3. File Names for the FTP Server Function
15.5.5. Response Messages Generated by the FTP Server Function
15.6. The Auto Delete Function
15.7. Zmodem Data Release Mode
16. Other Menu Functions
16.1. System Functions
16.1.1. Security Level
16.1.2. Pass-Through Mode
16.1.3. Monitor Mode
16.1.4. Clear Alarm Condition
16.1.5. Clear Alarm Counters
16.1.6. Download Parameters
16.1.7. Audit Trail
16.1.8. Upload Firmware
16.2. System Diagnostics
16.2.1. Load and Test Memory
16.2.2. Send Test Message
16.2.3. Test Pager
16.2.4. Send Test SNMP Trap
16.3. Default Parameters
17.3. Real Time Mode
17.4. Selective Read
17.5. Multiple Telnet Connections
17.5.1. Conflicts with Other Command Ports
18. Command Reference Guide
18.1. Command Mode Access
18.2. Command Syntax
18.3. Command Help
18.4. Command Summary
A. Specifications
B.2. Console Port
B.2.1. NetLink Console Port
B.2.2. NetLink Console Port
C. Cable Installation
D. Supervisor Functions and User Functions
D.1. Security Mode at Start Up
D.2. Dialback Security
D.3. Supervisor Mode and User Mode Functions
E. Alarm Clue Definition Tips
E.1. Headers Banners and Other Non-Data
E.1.1. The Comparative Operators
E.1.1.1. Limit Comparisons
E.1.1.2. Exclude Non-Data Characteristics
E.1.2. Exact Match with PBX Call Record Format
E.2. Programming Support
F. Customer Service
G. Bxx Command Summary
Index
2.1. Front Panel Indicators
PollCat NetLink

G. Bxx Command Summary

 

Cmd. Description / Options

^B66 Enable / Disable Time/Date Stamp ^B66[,port][,action] Where: [,port] Input Port: If this argument is omitted, the command

will be applied to PBX Port A by default. Options: ,A PBX Port A ,B PBX Port B ,X AUX Port

[,action] Enable / Disable Time/Date Stamp: Offers the Following: ,1 Disables Time/Date Stamp at Selected Port ,2 Enables Time/Date Stamp at Selected Port ,3 Enable Long Format Time/Date Stamp at Port

^B67 Set Auto Delete Option ^B67,1 Disable Auto Delete Option ^B67,2 Enable Auto Delete Option

^B68 Set Command Echo ^B68,1 Disable Command Echo ^B68,2 Enable Command Echo

^B70 Enable / Disable Immediate Callout and 80% Full Alarm ^B70 Disable Immediate Callout and 80% Full Alarm ^B70,I Enable Immediate Callout ^B70,I,1 Enable Immediate Callout ^B70,I,1,1 Enable Immediate Callout ^B70,I,1,2 Disable Immediate Callout ^B70,I,2,n Define Immediate Callout Number

(where n = Immediate Callout Number) ^B70,I,2,[Space] Clear Immediate Callout Number

^B70,% Enable 80% Full Alarm ^B70,%,1 Enable 80% Full Alarm ^B70,%,1,1 Enable 80% Full Alarm ^B70,%,1,2 Disable 80% Full Alarm ^B70,%,2,x Define Alarm Action, where x is the desired action

and 1 = None, 2 = Callout, 3 = Alpha Page, 4 = Numeric Page, 5 = SNMP Trap, 6 = Output Contact Action, 7 = Console Action

^B70,%,3,n Define number for 80% Full callout or page

(where n is the desired phone number) ^B70,%,3,[Space] Clear 80% Full Callout Number ^B70,%,4,PagerID Define Pager ID Number 1 for 80% Full Alarm ^B70,%,4,[Space] Clear Pager ID Number 1 ^B70,%,5,PagerID Define Pager ID Number 2 for 80% Full Alarm ^B70,%,5,[Space] Clear Pager ID Number 2 ^B70,%,6,PagerID Define Pager ID Number 3 for 80% Full Alarm ^B70,%,6,[Space] Clear Pager ID Number 3 ^B70,%,7,message Define 80% Full Alarm Message. ^B70,%,7,[Space] Clear 80% Full Alarm Message ^B70,%,8,1 Enable Auto Execute Function for 80% Full Alarm ^B70,%,8,2 Disable Auto Execute Function for 80% Full Alm. ^B70,%,9,cmds Define Auto Execute Command String for

80% Full Alarm ^B70,%,9,[Space] Clear 80% Full Auto Execute String

Apx-16

 

Cmd. Description / Options

^B90 Reset Modem Port / Define Modem Communication Parameters Reset Modem Port: Uses the Following Formats: ^B90 Reset Modem Port ^B90,Y Suppress "Sure" Prompt, Reset Modem Port Configure Modem Port: Uses the Following Format: ^B90[,baud][,parity][,data][,stop] Where: [,baud] Baud Rate: Can be any standard rate from 300 bps to

115.2 Kbps. If an asterisk is entered, the port will be set to the default modem port baud rate (57.6Kbps).

[,parity] Parity Bits: Offers the Following Options: ,N No Parity ,O Odd Parity ,E Even Parity

[,data] Data Bits: Offers the Following Options: ,7 Seven Data Bits ,8 Eight Data Bits

[,stop] Stop Bits: Offers the Following Options: ,1 1 Stop Bit ,2 2 Stop Bits

^B91 Define Console Port Communication Parameters ^B91[,baud][,parity][,data][,stop] Where: [,baud] Baud Rate: Can be any standard rate from 300 bps to

115.2 Kbps. If an asterisk is entered, the port will be set at the default rate specified by Setup Switches 1, 2, and 3.

[,parity] Parity Bits: Offers the Following Options: ,N No Parity ,O Odd Parity ,E Even Parity

[,data] Data Bits: Offers the Following Options: ,7 Seven Data Bits ,8 Eight Data Bits

[,stop] Stop Bits: Offers the Following Options: ,1 1 Stop Bit ,2 2 Stop Bits

Apx-18

 

 

Apx-20