Home WTI User's Guides
cover
Warnings and Cautions
1. Introduction
2. Unit Description
2.1. Front Panel Indicators
2.2. Back Panel
3. Quick Start Guide
3.2. Hardware Installation
3.2.1. Apply Power to the NetLink II
3.2.2. Connect your PC to the NetLink II
3.3. Communicating with the NetLink II
3.3.1. Access via Console Port or Modem
3.3.2. Access via Network
3.4. Connect your PBX to the NetLink II
4. Hardware Installation
4.1. Connect the NetLink II to your Power Supply
4.2. Set-Up Switches
4.2.1. Console Port Password
4.2.2. Power Up Console Defaults
4.2.3 Modem Speaker
4.3. Reset to Defaults
4.4. Connecting Cables and Phone Line
4.4.1. PBX Input Port
4.4.2. Modem Port
4.4.3. Console Port
4.4.4. Network Port
5. Configuration
5.1. Command Mode Access
5.2. Menu System Conventions
5.3. Set System Parameters
5.3.1. The User Directory
5.3.1.1. Administrator Access
5.3.1.2. Adding New User Accounts
5.3.1.3. Editing and Deleting User Accounts
5.3.1.4. Viewing the User Directory
5.3.2 Real-Time Clock Settings
5.4. Port Configuration
5.4.1. PBX Serial Input Port
5.4.1.1. Field Suppression; The Lucent Switch Feature
5.4.2. PBX IP Port Configuration
5.4.3. Console Port Configuration
5.4.4. Modem Port Configuration
5.4.4.1. Dialback Security
5.4.5. Network Port Configuration
5.4.5.1. The IP Security Feature
5.4.5.2. The Email Text Messaging Parameters Menu
5.4.5.3. PPP Dialout Configuration
5.4.6. Push File Configuration
5.4.7. Server Configuration
6. Menu System Description
6.1. Software Tree
7. Status Screens
7.1. Buffer Status Screen
7.2. File List Screen
7.4. The User Directory
7.5 PBX Port Status Screen
7.6. The PBX IP Port Status Screen
7.7. The Console Port Status Screen
7.8. The Modem Port Status Screen
7.9. The Network Port Status Screen
7.10. Scheduled Action Status Screens
7.11. PBX Inactivity Alarm Status Screens
7.12. 80 Full Alarm Status Screen
7.13. Data Filters Alarms Status Screen
7.15. Reason for Action Screen
7.16. Alarm Filter Clue Status Screens
8. The Data Filters
8.1. The Data Filter Configuration Menus
8.2. Defining the Data Filter Format
8.3. Defining Data Filter Clues
8.4. Logical and Relational Operators 8.4. Logical and Relational Operators
8.4.1. Logical AND-OR Conditions
8.4.1.1. Logical AND Conditions
8.4.1.2. Logical OR Conditions
8.4.2. The Contains String Operator
8.5. Real Time Variables
8.6. Assigning the Data Filter to a Port
8.7. Data Filter Definition Examples
9. The Alarm Filters
9.1. Common Types of Suspect Phone Activity
9.2. The Alarm Configuration Menu
9.2.1. Default Alarm Filter Actions
9.3. The Alarm Filter Configuration Menus
9.4. Defining the Alarm Filter Format
9.5. Defining Alarm Filter Clues
9.5.1. Alarm Clue Definition
9.5.2. Editing and Deleting Clues
9.6. Logical and Relational Operators
9.6.1. Logical AND-OR Conditions
9.6.1.1. Logical AND Conditions
9.6.1.2. Logical OR Conditions
9.6.2. The Contains String Operator
9.7. Real Time Variables
9.8. Assigning the Alarm Filter to a Port
9.9. Match Parameter Definition Examples
10. PBX Inactivity Alarms
10.1. Schedules and Timers
10.2. Enabling the PBX Inactivity Alarm
11. The 80 Full Alarm
12. Alarm Actions
12.1. Alarm Actions for Alarm Filter Clues
12.2. Alarm Action Summary
12.2.1. None
12.2.2. Callout
12.2.3. Alphanumeric Page
12.2.4. Numeric Page
12.2.6. Email Text Message
12.2.7. Console
12.3. The Auto Execute Function
13. Scheduled Actions
14. Saving NetLink II Parameters
14.1. Saving Parameters to Flash Memory
14.2. Saving and Restoring Parameters from an ASCII File
14.2.1. Saving Parameters to an ASCII File
14.2.2. Saving Parameters to an ASCII File
14.3. Configuring NetLink II with Saved Parameters
15. Buffer Functions
15.1. Memory Partitions and Shared Data
15.1.1. Partitions and Files
15.1.2. Setting the Partition
15.1.3. Releasing the Partition
15.2. Menu Driven Data Release
15.2.1. The Buffer Functions Menu
15.2.2. Read Session Parameters
15.3. Command Driven Data Release
15.3.1. Command B00
15.3.2. The B01 Command Line
15.3.3. Command B01 Examples
15.3.4. Other Commands Used During Data Release
15.4. Retrieving Data Using the Push Function
15.4.1. File Names Created by the Push Function
15.4.2. Push Start Time
15.5. Retrieving Data Using the Server Function
15.5.1. File Names Created by the Server Feature
15.6. The Auto Delete Function
15.7. Zmodem Data Release Mode
16. Other Menu Functions
16.1. System Functions
16.1.1. Pass-Through Mode
16.1.2. Monitor Mode
16.1.3. Clear Alarm Condition
16.1.4. Clear Alarm Counters
16.1.5. Download Parameters
16.1.6. Audit Trail
16.1.7. Upload Firmware
16.1.8. Download SSH Server Keys
16.2. System Diagnostics
16.2.1. Load and Test Memory
16.2.2. Send Test Message
16.2.3. Test Pager
16.2.4. Send Test SNMP
16.2.5 Send Test SYSLOG Message
16.3. Reboot System
17. Command Reference Guide
17.1. Command Mode Access
17.2. Command Help
17.3. Command Syntax
17.4. Command Summary
A. Specifications
B. Description of System Interfaces
B.1. Serial PBX Input Port
B.2. Console Port
C. Administrator Functions and User Functions
C.1. Security Mode at Start Up
C.2. Dialback Security
C.3. Administrator Mode and User Mode Functions
D. Alarm Clue Definition Tips
D.1. Headers Banners and Other Non-Data
D.1.1. The Comparative Operators
D.1.1.1. Limit Comparisons
D.1.1.2. Exclude Non-Data Characteristics
D.1.2. Exact Match with PBX Call Record Format
D.2. Programming Support
E. SSH Application Notes
E.1. Windows XP - Assign a User Name
E.2. Create the User Name in the WINSSHD Application
E.3. Generate Netlink client keys
E.4. Import the Client Keys Into the WINSSHD Application
E. Customer Service
Index
PollCat NetLink II B

6.1. Software Tree

 

Command functions are accessed via the Main Menu, which is the first  screen displayed when command mode is activated. The Main Menu branches off into a series of submenus.  Each submenu is dedicated to a specific task, such as port configuration, buffer management, etc.  To access a submenu, type the number for the desired item and press [Enter].


Main Menu Item

1.      Status Displays

2.      Buffer Functions

3.      System Functions

4.      System Diagnostics

5.      ^Bxx Command Help

6.      Recall Parameters

7.      Save Parameters

8.      Exit Command Mode

9.       - 20.

 

Submenu(s)/Function(s)

Display Status Screens for user-defined parameters, memory  usage, and alarm conditions (See Section 7).

1.      Set Read Session Parameters

2.      Set Partition

3.      Release Partition

4.      Enter Read Session

5.      Erase Partition Data

6.      Erase All Data

7.      Erase All Data & Clear Alarm Counters

8.      Release Remote Partition

 

1.      PassThrough Mode

2.      Monitor Mode

3.      Clear Alarm Condition

4.      Clear Alarm Clue Counters

5.      Download Parameters

6.      Audit Trail Functions

7.      Upload Firmware

8.      Download SSH Server Key

 

1.      Load & Test Memory

2.      Send Test Message

3.      Test Pager

4.      Send Test SNMP Trap(s)

5.      Send Test SYSLOG Message

 

Lists all ^Bxx format (manually entered) commands. (See Section 17). "A" option allows access to menu with additional command help.

Restores previously saved parameters.

Writes user-defined parameters from temporary memory to flash memory.

Exits from command mode, disconnects, and puts Console Port to sleep.

Reserved for Future Use.


Main Menu Item

Submenu(s)/Function(s)


21. Reboot System

1.      Reboot Only (Do Not Default Parameters)

2.      Reboot & Default (Keep IP Parameters)

3.      Reboot & Default (Keep SSH Keys)

4.      Reboot & Default (All Parameters)

5.      Default (Keep IP Parameters)

6.      Default (Keep SSH Keys)

7.      Default (All Parameters)

 

22. Port Configuration

1. PBX Port

Communication Settings

1.      Baud Rate

2.      Data Bits

3.      Parity

4.      Stop Bits

5.      Handshake Mode

 

Input Parameters

1.      Time Date Stamp

2.      Serial Number Stamp

3.      Strip Non-Printable Characters

4.      End Character

5.      Alarm Filter

6.      Store Alarm Data

7.      Data Filter

8.      PBX Inactivity Alarm

 

Field Suppression

31. Lucent Switch

11. PBX IP Port

Communication Settings

1.      Service

2.      Port Number

3.      Window Size

4.      Keep Alive Send

5.      Keep Alive Response

6.      SDM Response

 

Input Parameters

1.      Time Date Stamp

2.      Serial Number Stamp

3.      Strip Non-Printable Characters

4.      End Character

5.      Alarm Filter

6.      Store Alarm Data

7.      Data Filter

8.      PBX Inactivity Alarm

 

Miscellaneous

1.      Disconnect

2.      Last Status

 

Field Suppression

31. Lucent Switch


Main Menu Item

Submenu(s)/Function(s)


22. Port Configuration

21. Console Port

(Continued)

22. Modem Port

Communication Settings

1.      Baud Rate

2.      Data Bits

3.      Parity

4.      Stop Bits

5.      Handshake Mode

 

General Parameters

1.      Command Echo

2.      Response Type

3.      "Sure" Prompt

4.      Command Timeout

5.      Audit Trail

 

Action Parameters

16. Action Delay

Output Parameters

1.      Output Mode

2.      Data on ^B01

3.      Hold End Data

4.      Line Number Tag

5.      Send Compressed

6.      Auto Delete

 

Communication Settings

1.      Baud Rate

2.      Data Bits

3.      Parity

4.      Stop Bits

5.      Handshake Mode

6.      Modem Strings

7.      Reset Modem

 

General Parameters

1.      Command Echo

2.      Response Type

3.      "Sure" Prompt

4.      Command Timeout

5.      Audit Trail

 

Action Parameters

16. Action Delay

Output Parameters

1.      Output Mode

2.      Data on ^B01

3.      Hold End Data

4.      Line Number Tag

5.      Send Compressed

6.      Auto Delete

 

Callout Parameters

1.      Dial Attempts

2.      Sequence Attempts

3.      Sequence Delay

4.      Immediate Callout

5.      Immediate Phone Number

6.      Dialback Security

 


Main Menu Item

Submenu(s)/Function(s)


22. Port Configuration

23. Network Port

(Continued)

31. Push

Communication Settings

1.      IP Address

2.      Subnet Mask

3.      Gateway Address

4.      DHCP

5.      IP Security

 

General Parameters

1.      Command Echo

2.      Response Type

3.      "Sure" Prompt

4.      Command Timeout

5.      Audit Trail

 

Action Parameters

16. Action Delay

Output Parameters

1.      Output Mode

2.      Data on ^B01

3.      Hold End Data

4.      Line Number Tag

5.      Send Compressed

6.      Auto Delete

 

Servers and Clients

1.      Telnet Access

2.      SSH Access

3.      Syslog IP Address

4.      SNMP Access

5.      SNMP Trap

6.      TACACS

7.      RADIUS

8.      Email/Text Messaging

9.      PPP Dialout

 

Server Parameters

1.      Server Address

2.      User Name

3.      File Name

4.      Directory

5.      File Mode

6.      File Extension Increment

 

FTP Server Parameters

1.      Password

2.      Account

 

SFTP Server Parameters

1.      SFTP Server Key

2.      SFTP Client Key

 

Action Parameters

1.      Read Session

2.      Push Action

3.      Periodic Push

4.      Transmit Attempts

5.      Transmit Delay

6.      Auto Delete

7.      Start Time

 

Miscellaneous

1.      Force Push

2.      Test Push

3.      Stop Push

 


Main Menu Item

Submenu(s)/Function(s)

 


Main Menu Item

Submenu(s)/Function(s)


25. Alarm Configuration

1               Alarm Filter 1

2               Alarm Filter 2

3               PBX Inactivity Alarm 1

4               PBX Inactivity Alarm 2

 

1               Define Format

2               Display Clue Details

3               Define Clues

4               Edit Clues

5               Delete Clues

6               Define Alarm Review Schedule

 

1               Define Format

2               Display Clue Details

3               Define Clues

4               Edit Clues

5               Delete Clues

6               Define Alarm Review Schedule

 

Schedule

1. Weekday Alarm (On/Off) 2-5. Weekday Schedules & Timers

6. Weekend Alarm (On/Off) 7-10. Weekend Schedules & Timers

Exclusions (MM/DD)

1.      Add Exclusion

2.      Delete Exclusion

 

Alarm Action Parameters

1.      Action

2.      Phone Number

3.      Pager ID 1

4.      Pager ID 2

5.      Pager ID 3

6.      SNMP Management

7.      Email / Text Message To

8.      Message

9.      Auto Execute

10.    Execute Commands

 

Schedule

1. Weekday Alarm 2-5. Weekday Schedules & Timers

6. Weekend Alarm 7-10. Weekend Schedules & Timers

Exclusions (MM/DD)

1.      Add Exclusion

2.      Delete Exclusion

 

Alarm Action Parameters

1.      Action

2.      Phone Number

3.      Pager ID 1

4.      Pager ID 2

5.      Pager ID 3

6.      SNMP Management

7.      Email / Text Message To

8.      Message

9.      Auto Execute

10.    Execute Commands

 


Main Menu Item

1.      Alarm Configuration (continued)

2.      Data Filter Configuration

 

Submenu(s)/Function(s)

5. 80% Full Alarm

Alarm

1. 80% Full Alarm

Alarm Action Parameters

1.      Action

2.      Phone Number

3.      Pager ID 1

4.      Pager ID 2

5.      Pager ID 3

6.      SNMP Management

7.      Email / Text Message To

8.      Message

9.      Auto Execute

10.    Execute Commands

 

Default Alarm Filter Action

1.      Action

2.      Phone Number

3.      Pager ID 1

4.      Pager ID 2

5.      Pager ID 3

6.      SNMP Management

7.      Email / Text Message To

8.      Message

9.      Auto Execute

10.    Execute Commands

11.    Send Alarm Record

 

1.      Data Filter 1

2.      Data Filter 2

 

1.      Data Filter Action

2.      Define Format

3.      Display Clue Details

4.      Define Clues

5.      Edit Clues

6.      Delete Clues

 

1.      Data Filter Action

2.      Define Format

3.      Display Clue Details

4.      Define Clues

5.      Edit Clues

6.      Delete Clues

 

6-8