Home WTI User's Guides
cover
Warnings and Cautions
1. Introduction
2. Unit Description
2.1. Front Panel Indicators
2.2. Back Panel
3. Quick Start Guide
3.2. Hardware Installation
3.2.1. Apply Power to the NetLink II
3.2.2. Connect your PC to the NetLink II
3.3. Communicating with the NetLink II
3.3.1. Access via Console Port or Modem
3.3.2. Access via Network
3.4. Connect your PBX to the NetLink II
4. Hardware Installation
4.1. Connect the NetLink II to your Power Supply
4.2. Set-Up Switches
4.2.1. Console Port Password
4.2.2. Power Up Console Defaults
4.2.3 Modem Speaker
4.3. Reset to Defaults
4.4. Connecting Cables and Phone Line
4.4.1. PBX Input Port
4.4.2. Modem Port
4.4.3. Console Port
4.4.4. Network Port
5. Configuration
5.1. Command Mode Access
5.2. Menu System Conventions
5.3. Set System Parameters
5.3.1. The User Directory
5.3.1.1. Administrator Access
5.3.1.2. Adding New User Accounts
5.3.1.3. Editing and Deleting User Accounts
5.3.1.4. Viewing the User Directory
5.3.2 Real-Time Clock Settings
5.4. Port Configuration
5.4.1. PBX Serial Input Port
5.4.1.1. Field Suppression; The Lucent Switch Feature
5.4.2. PBX IP Port Configuration
5.4.3. Console Port Configuration
5.4.4. Modem Port Configuration
5.4.4.1. Dialback Security
5.4.5. Network Port Configuration
5.4.5.1. The IP Security Feature
5.4.5.2. The Email Text Messaging Parameters Menu
5.4.5.3. PPP Dialout Configuration
5.4.6. Push File Configuration
5.4.7. Server Configuration
6. Menu System Description
6.1. Software Tree
7. Status Screens
7.1. Buffer Status Screen
7.2. File List Screen
7.4. The User Directory
7.5 PBX Port Status Screen
7.6. The PBX IP Port Status Screen
7.7. The Console Port Status Screen
7.8. The Modem Port Status Screen
7.9. The Network Port Status Screen
7.10. Scheduled Action Status Screens
7.11. PBX Inactivity Alarm Status Screens
7.12. 80 Full Alarm Status Screen
7.13. Data Filters Alarms Status Screen
7.15. Reason for Action Screen
7.16. Alarm Filter Clue Status Screens
8. The Data Filters
8.1. The Data Filter Configuration Menus
8.2. Defining the Data Filter Format
8.3. Defining Data Filter Clues
8.4. Logical and Relational Operators 8.4. Logical and Relational Operators
8.4.1. Logical AND-OR Conditions
8.4.1.1. Logical AND Conditions
8.4.1.2. Logical OR Conditions
8.4.2. The Contains String Operator
8.5. Real Time Variables
8.6. Assigning the Data Filter to a Port
8.7. Data Filter Definition Examples
9. The Alarm Filters
9.1. Common Types of Suspect Phone Activity
9.2. The Alarm Configuration Menu
9.2.1. Default Alarm Filter Actions
9.3. The Alarm Filter Configuration Menus
9.4. Defining the Alarm Filter Format
9.5. Defining Alarm Filter Clues
9.5.1. Alarm Clue Definition
9.5.2. Editing and Deleting Clues
9.6. Logical and Relational Operators
9.6.1. Logical AND-OR Conditions
9.6.1.1. Logical AND Conditions
9.6.1.2. Logical OR Conditions
9.6.2. The Contains String Operator
9.7. Real Time Variables
9.8. Assigning the Alarm Filter to a Port
9.9. Match Parameter Definition Examples
10. PBX Inactivity Alarms
10.1. Schedules and Timers
10.2. Enabling the PBX Inactivity Alarm
11. The 80 Full Alarm
12. Alarm Actions
12.1. Alarm Actions for Alarm Filter Clues
12.2. Alarm Action Summary
12.2.1. None
12.2.2. Callout
12.2.3. Alphanumeric Page
12.2.4. Numeric Page
12.2.6. Email Text Message
12.2.7. Console
12.3. The Auto Execute Function
13. Scheduled Actions
14. Saving NetLink II Parameters
14.1. Saving Parameters to Flash Memory
14.2. Saving and Restoring Parameters from an ASCII File
14.2.1. Saving Parameters to an ASCII File
14.2.2. Saving Parameters to an ASCII File
14.3. Configuring NetLink II with Saved Parameters
15. Buffer Functions
15.1. Memory Partitions and Shared Data
15.1.1. Partitions and Files
15.1.2. Setting the Partition
15.1.3. Releasing the Partition
15.2. Menu Driven Data Release
15.2.1. The Buffer Functions Menu
15.2.2. Read Session Parameters
15.3. Command Driven Data Release
15.3.1. Command B00
15.3.2. The B01 Command Line
15.3.3. Command B01 Examples
15.3.4. Other Commands Used During Data Release
15.4. Retrieving Data Using the Push Function
15.4.1. File Names Created by the Push Function
15.4.2. Push Start Time
15.5. Retrieving Data Using the Server Function
15.5.1. File Names Created by the Server Feature
15.6. The Auto Delete Function
15.7. Zmodem Data Release Mode
16. Other Menu Functions
16.1. System Functions
16.1.1. Pass-Through Mode
16.1.2. Monitor Mode
16.1.3. Clear Alarm Condition
16.1.4. Clear Alarm Counters
16.1.5. Download Parameters
16.1.6. Audit Trail
16.1.7. Upload Firmware
16.1.8. Download SSH Server Keys
16.2. System Diagnostics
16.2.1. Load and Test Memory
16.2.2. Send Test Message
16.2.3. Test Pager
16.2.4. Send Test SNMP
16.2.5 Send Test SYSLOG Message
16.3. Reboot System
17. Command Reference Guide
17.1. Command Mode Access
17.2. Command Help
17.3. Command Syntax
17.4. Command Summary
A. Specifications
B. Description of System Interfaces
B.1. Serial PBX Input Port
B.2. Console Port
C. Administrator Functions and User Functions
C.1. Security Mode at Start Up
C.2. Dialback Security
C.3. Administrator Mode and User Mode Functions
D. Alarm Clue Definition Tips
D.1. Headers Banners and Other Non-Data
D.1.1. The Comparative Operators
D.1.1.1. Limit Comparisons
D.1.1.2. Exclude Non-Data Characteristics
D.1.2. Exact Match with PBX Call Record Format
D.2. Programming Support
E. SSH Application Notes
E.1. Windows XP - Assign a User Name
E.2. Create the User Name in the WINSSHD Application
E.3. Generate Netlink client keys
E.4. Import the Client Keys Into the WINSSHD Application
E. Customer Service
Index
PollCat NetLink II B

E. Customer Service

 

Customer Service hours are from 8:00 am to 5:00 PM, Pacific Time, Monday through Friday.  When calling, please be prepared to give provide the serial number of the unit, as well as a description of the problem. If the unit should need to be returned for factory repair, it must be accompanied by a Return Authorization Number issued by WTI Customer Service.

WTI Customer Service

5 Sterling Irvine, California 92618-2517

Local Phone: (949) 586-9950 Toll Free Service Line: 1-888-280-7227 Service Fax: (949) 457-8138

E-mail: service@wti.com

Apx-12

 

 

Apx-14

Cmd. Description / Options ^B50 Default Parameters

^B50,1 Reboot, Do Not Default Parameters ^B50,2 Reboot and Default All Parameters (Except Network Parameters) ^B50,3 Reboot and Default All Parameters (Except SSH Keys) ^B50,4 Reboot and Default All Parameters ^B50,5 Default All Parameters (Except Network Parameters),

Do Not Reboot ^B50,6 Default All Parameters (Except SSH Keys), Do Not Reboot ^B50,7 Default All Parameters, Do Not Reboot ,Y (Optional) Suppress Confirmation Prompt. Can be combined with

any other ^B50 command option (e.g., ^B50,2,Y)

^B51 Store Alarm Data

^B51[,port]<,file> Where: [,port] Input Port:  Offers the following options: ,A Serial PBX Port ,I PBX IP Port <,file> Storage Location:  Offers the following options: ,1 Store Alarm Data from this Port in Alarm File ,2 Store Alarm Data from this Port in Standard File ,3 Store Alarm Data from this Port in Both Alarm File and Standard File

^B52 Release / Hold End Data Message

^B52,1 Release End Data Message ^B52,2 Hold End Data Message

^B53 Set Compression Mode

^B53,1 Release Data in Compressed Format ^B53,2 Release Data in Decompressed Format

^B54 Release Data on ^B01

^B54,1 Release First Group without ^B02 ^B54,2 Wait for Command ^B02

^B55 Strip Non-Printable Codes

^B55[,port]<,action> Where: [,port] Input Port:  If this argument is omitted, the command will be applied to the Serial PBX Port by default. Options: ,A Serial PBX Port ,I PBX IP Port <,action> Store / Strip Codes:  Offers the Following Options: ,1 Store Non-Printable Codes ,2 Strip Non-Printable Codes

^B56[,port]<,filter> Where: [,port] Input Port:  If this argument is omitted, the command will be applied to the Serial PBX Port by default. Options: ,A Serial PBX Port ,I PBX IP Port <,filter> Data Filter:  Offers the Following Options: ,1 Disable Data Filter at Selected Port ,2 Assign Data Filter #1 to Selected Port ,3 Assign Data Filter #2 to Selected Port

^B57 Enable / Disable XON / XOFF Function

^B57[,port]<,action>

Where: [,port] Input Port:  If this argument is omitted, the command will be

applied to the Serial PBX Port by default. Options: ,A Serial PBX Port ,I PBX IP Port

<,action> Enable / Disable Action:  Offers the Following Options: ,1 Enable XON/XOFF at Selected Port ,2 Disable XON/XOFF at Selected Port

^B59 Line ID Option

^B59,1 Disable Line ID Option ^B59,2 Enable Line ID Option

^B60 Define Console / Modem Port Bits and Parity

^B60[,port]<,set> Where: [,port] Port: When this argument is omitted, the command will be applied to the Console Port by default. Options: ,C Set Bits/Parity for Console Port ,M Set Bits/Parity for Modem Port <,set> Bits / Parity Setting:  Offers the Following Options: ,1 Set Selected Port to 7 Bits, Even Parity ,2 Set Selected Port to 7 Bits, Odd Parity ,3 Set Selected Port to 8 Bits, No Parity ,4 Set Selected Port to 7 Bits, No Parity

^B61 Define PBX Port Bits and Parity

^B61,1 Set PBX Port to 7 Bits, Even Parity ^B61,2 Set PBX Port to 7 Bits, Odd Parity ^B61,3 Set PBX Port to 8 Bits, No Parity ^B61,4 Set PBX Port to 7 Bits, No Parity

^B62 Select Output Mode

^B62,1 Release Data in ASCII Format ^B62,2 Release Data in ASCII Format ^B62,4 Release Data in Xmodem Format ^B62,5 Release Data in Zmodem Format

^B64 Enable / Disable Wrap Around Mode

^B64,1 Disable Wrap Around Mode ^B64,2 Enable Wrap Around Mode

Apx-16

^B65 Select Alarm Filters

^B65[,port]<,filter>

Where: [,port] Input Port:  If this argument is omitted, the command will be

applied to the Serial PBX Port by default. Options: ,A Serial PBX Port ,I PBX IP Port

<,filter> Alarm Filter:  Offers the Following Options: ,1 Disable Alarm Filter at Selected Port ,2 Assign Alarm Filter #1 to Selected Port ,3 Assign Alarm Filter #2 to Selected Port

^B66 Enable / Disable Time/Date Stamp

^B66[,port]<,action>

Where: [,port] Input Port:  If this argument is omitted, the command will be

applied to the Serial PBX Port by default. Options: ,A Serial PBX Port ,I PBX IP Port

<,action> Enable / Disable Time/Date Stamp:  Offers the Following: ,1 Disables Time/Date Stamp at Selected Port ,2 Enables Time/Date Stamp at Selected Port ,3 Enable Long Format Time/Date Stamp at Port

^B67 Set Auto Delete Option

^B67,1 Disable Auto Delete Option ^B67,2 Enable Auto Delete Option

^B68 Set Command Echo

^B68,1 Disable Command Echo ^B68,2 Enable Command Echo

^B70 Disable Immediate Callout and 80% Full Alarm ^B70,I Enable Immediate Callout ^B70,I,1 Enable Immediate Callout ^B70,I,1,1 Enable Immediate Callout ^B70,I,1,2 Disable Immediate Callout ^B70,I,2,n Define Immediate Callout Number

(where n = Immediate Callout Number) ^B70,I,2,[Space] Clear Immediate Callout Number

^B70,% Enable 80% Full Alarm ^B70,%,1 Enable 80% Full Alarm ^B70,%,1,1 Enable 80% Full Alarm ^B70,%,1,2 Disable 80% Full Alarm ^B70,%,2,x Define Alarm Action, where x is the desired action and

1 = None, 2 = Callout, 3 = Alpha Page, 4 = Numeric Page, 5 = SNMP Trap, 6 = Output Contact Action, 7 = Console Action

^B70,%,3,n Define number for 80% Full callout or page

(where n is the desired phone number) ^B70,%,3,[Space] Clear 80% Full Callout Number ^B70,%,4,PagerID Define Pager ID Number 1 for 80% Full Alarm ^B70,%,4,[Space] Clear Pager ID Number 1 ^B70,%,5,PagerID Define Pager ID Number 2 for 80% Full Alarm ^B70,%,5,[Space] Clear Pager ID Number 2 ^B70,%,6,PagerID Define Pager ID Number 3 for 80% Full Alarm ^B70,%,6,[Space] Clear Pager ID Number 3 ^B70,%,7,message Define 80% Full Alarm Message ^B70,%,7,[Space] Clear 80% Full Alarm Message ^B70,%,8,1 Enable Auto Execute Function for 80% Full Alarm ^B70,%,8,2 Disable Auto Execute Function for 80% Full Alarm ^B70,%,9,cmds Define Auto Execute Command String for 80% Full Alarm ^B70,%,9,[Space] Clear 80% Full Auto Execute String

^B72 Display Time, Day, Date ^B74 Save / Recall Parameters

^B74 Save Current Parameters to Flash Memory ^B74,1 Save Current Parameters to Flash Memory ^B74,2 Recall Parameters from Flash Memory ,Y (Optional Argument) Suppress "Sure?" Prompt

^B75 Enable / Disable "Sure?" Prompt

^B75,1 Disable "Sure?" Prompt ^B75,2 Enable "Sure?" Prompt

^B76 Release Remote Partition

^B76 Release Console Port Partition ^B76,c Release Console Port Partition ^B76,m Release Modem Port Partition ^B76,T1 Release Partition for Telnet Port #1 ^B76,T2 Release Partition for Telnet Port #2 ^B76,T3 Release Partition for Telnet Port #3 ,Y (Optional Argument) Suppress "Sure?" Prompt

Apx-18